4S 1500mAh 100C LiPo Battery with XT60 Connector Full Guide

If you’ve ever flown FPV drones, raced RC cars, or tinkered with high-power RC planes, you’ve probably bumped into the 4S 1500mAh 100C LiPo Battery with XT60 Connector. It’s one of those batteries that seems small, but packs a punch. I’ve used a few myself, and it’s worth understanding what you’re actually getting before you buy.

Specs at a Glance

Let’s break down the numbers, because they really matter:

• Voltage: 4S means four cells in series. Each cell has a nominal 3.7V, so total is about 14.8V.
• Capacity: 1500mAh – or 1.5Ah. Enough to give decent flight time without being a weight nightmare.
• Discharge Rate (C-rate): 100C continuous. That’s roughly 150A if you do the math (1.5 × 100). Some batteries also list a burst rating up to 200C. That’s for short, power moments.
• Connector: XT60. Standard, reliable, good for mid-to-high currents.
• Weight and size: Around 180–190g, dimensions roughly 35×40×77mm. Small variations exist depending on brand.
• Charge rate: Usually up to 5C max, meaning 7.5A for a 1500mAh battery. I generally stick to 1–2C to be safe.

Why People Like Them

Honestly, there’s a reason this battery is popular:

• High Discharge – That 100C rating isn’t just for show. Fast FPV quads, RC planes, or cars that want a sharp burst of power will love it. Burst ratings let you push even harder, short-term.
• Decent Capacity – 1500mAh is a sweet spot. Not too light, not too heavy. Enough juice for a few intense flights without bogging down your craft.
• XT60 Connector – Widely used, easy to swap, won’t fry itself under moderate load.
• Compact & Lightweight – Fits in mid-sized drones, keeps balance and agility intact.

What It’s Good For

If you’re wondering whether this battery fits your setup:

• FPV racing drones – especially 5-inch, 250mm frames. High current, quick response.
• RC planes or helicopters – aggressive maneuvers, short power bursts.
• High-speed RC cars – instant acceleration and top-end performance.
• Drones where you want a compromise between flight time and agility.

In short, anywhere you need high current without killing mobility, this battery works.

Downsides & Things to Watch

Nothing’s perfect. Even this one has trade-offs:

• Price – good batteries cost more. Don’t expect to find a 100C LiPo for cheap.
• Weight – 180–190g Drone battery is fine for most drones, but mini quads might feel heavy.
• Voltage limits – can’t put this in something rated for 3S (11.1V). That would be a problem.
• C-rate isn’t magic – 100C is theoretical. Real output depends on heat, internal resistance, and build quality.
• Safety – LiPos are finicky. Overcharge, over-discharge, or physical damage? Fire or swelling is possible. Charge in a safe place, monitor, never leave unattended.
• Storage – keep them at 3.7–3.9V per cell if not using for a while, or you’ll degrade the battery.

Digging Into the Numbers

• Voltage: 4S = 14.8V. Good for high-power setups.
• Capacity: 1500mAh balances weight and flight time. Bigger capacity = more time but heavier.
• 100C discharge: handles high-current draws for fast, aggressive use. Burst can go even higher.
• XT60: works, reliable, widely available.
• Charge rate: max 5C, safe practice is 1–2C.

Buying Tips

A few things I learned after testing these:

1. Match your device – check max voltage and current. Don’t force a 4S into a 3S setup.
2. Size & weight – make sure it fits your frame, battery compartment, or chassis. Don’t just eyeball it.
3. Brand matters – Rotor Riot, RDQ, CNHL are solid bets. Unknown brands? Maybe, but check reviews.
4. Connector & wires – XT60 is fine, but make sure wires are thick enough for your current draw.
5. Safety first – charge on fireproof surfaces, monitor while charging, discard if swollen/damaged.
6. Value vs performance – if you’re not racing or pushing max currents, a lower C-rate battery may be plenty.

Bottom Line

The 4S 1500mAh 100C LiPo UAV Battery with XT60 Connector is a versatile, powerful option for FPV drones, RC planes, and high-speed cars. It’s not the cheapest, and you need to respect LiPo safety, but for mid-sized models and aggressive setups, it delivers. Light enough for maneuverability, strong enough for instant power. Follow safety protocols, pick a trusted brand, and you’ve got a reliable battery that won’t disappoint.

33.3V Lithium Battery for Security Equipment and Drone Battery Packs

November 14, 2025

Get reliable 33.3V 18650 drone battery pack built with Grade A lithium-ion cells. Ideal for drones, security systems, medical devices, aerospace, and industrial equipment. We offer custom drone battery packs with long cycle life, high discharge performance, and stable power. OEM/ODM supported by a leading drone battery pack manufacturer in China.

1800mAh 3S 11.1V FPV Drone LiPo Battery

August 22, 2025

Apsenx 3S LiPo battery delivers powerful, stable energy for FPV and RC drones. Designed for advanced pilots, it balances voltage, capacity, and weight for optimal flight performance and extended runtime.

12000mAh High-Rate Low-Temperature Power UAV Lithium Battery for Drones

August 10, 2025

Apsen 12000mAh high-rate low-temperature UAV lithium battery with smart BMS for industrial and consumer drones. Long endurance, high discharge rate, customizable voltage, and certified global safety compliance.

8000mAh 21700 6S2P 22.2V 10C High-Rate LiPo Battery for RC Aircraft and Drones

August 10, 2025

Apsen 8000mAh 21700 6S2P 22.2V 10C LiPo battery for RC aircraft, FPV drones, and industrial UAVs. High discharge rate, customizable connectors, OEM/ODM support, and certified safety compliance.